Untuk Pemesanan / Tanya jawab, silakan SMS 0823-9141-3131 David

JBL Calcium Ca test Lihat Ukuran Penuh

JBL Calcium Ca test

  • alat tester pengukur Calcium / Ca
  • memberikan hasil tes kandungan Calcium dengan akurat pada akuarium air laut
  • mudah di gunakan

Lebih detail

Ketersediaan: Stok kosong

Stok kosong, mau kami kabarkan ketika produk ini ready stok? hubungi kami

Rp.160.000

alat tester pengukur Calcium / Ca

JBL Calcium Ca test, alat pengukur kadar Calcium pada akuarium air laut. Calcium penting untuk kita ketahui kadarnya karena akan berpengaruh langsung dengan Corals hidup. Calcium membantu untuk membangun substansi struktural karang. Tingkat kalsium yang terlalu rendah dalam akuarium laut akan mempengaruhi pertumbuhan karang dan merusak fungsi kehidupan karang dan substansi. Oleh sebab itu perlu kita cek secara berkala.

 

Healthy aquariums with conditions close to nature
The right water values are dependent on the fish stock, any algae or corals in the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly.

For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc.

Why test?
Calcium helps to build up the structural substance of corals. A too low calcium level in the marine aquarium affects the coral growth and impairs the coral’s life function and substance

 

Ringkasan kegunaan produk :

  • alat tester pengukur Calcium / Ca
  • memberikan hasil tes kandungan Calcium dengan akurat pada akuarium air laut
  • mudah di gunakan

 

Informasi Lainnya

  • Tipe : Cair
  • Jumlah pemakaian : (tergantung, tidak tetap)

 

Instructions

1. Swill out the measuring beaker several times with the water to be tested.
2. Fill the measuring beaker to the 5 ml mark with the water to be tested. Use the enclosed syringe for exact results.
3. Add 5 drops of reagent 1 and agitate to mix. The test result is not affected by any clouding which may occur. Wait 1 minute.
4. Add 1 small measuring spoonful of reagent 2 (narrow end of the enclosed double-ended spoon) and agitate until the powder has dissolved.
5. Add reagent 3 one drop at a time, counting the drops, and agitate after each drop until the colour changes from pink via violet to blue. The number of drops needed multiplied by 20 gives the calcium content in mg/l. Example: 12 drops of reagent 3 = 240 mg/l.