Untuk Pemesanan / Tanya jawab, silakan SMS 0823-9141-3131 David

JBL Iron Fe test Lihat Ukuran Penuh

JBL Iron Fe test

  • alat tester pengukur Iron / Fe
  • memberikan hasil tes kandungan Copper dengan akurat pada akuarium air tawar atau air laut
  • range of values:< 0,02; 0,05; 0,1; 0,2; 0,4; 0,6; 0,8; 1,0; 1,5 mg/l
  • merespon terhadap segala jenis bentuk Iron Fe yang terlarut
  • untuk 50 kali pemakaian

Lebih detail

Ketersediaan: Stok kosong

Stok kosong, mau kami kabarkan ketika produk ini ready stok? hubungi kami

Rp.191.000

alat tester pengukur Iron / Fe

JBL Iron Fe test, alat pengukur kadar Iron Fe pada akuarium air tawar, air laut maupun air kolam taman. Menggunakan metode kompensasi yang di kembangkan oleh JBL, mampu memberikan hasil yang akurat dan dapat di andalkan bahkan pada air yang keruh, misalnya yang disebabkan oleh peat filter atau pengobatan lainnya.

Why test?
Besides an adequate supply of CO2, aquatic vegetation needs iron and, trace elements. Since healthy aquatic plants constantly consume iron, and other trace elements, which only keep in the water for a limited period even when bonded to so-called chelating agents (usually found in modern fertilizers, e.g. in JBL Ferropol), the iron content must be monitored regularly with the JBL iron test set Fe and replenished if necessary. A concentration of 0.1-0.2 mg/litre (ppm) is normally
adequate for good plant growth, for very plant intensive aquariums values up to 0.5 mg/l (ppm) can be useful. The JBL iron test set Fe can also be used to measure the iron content in tap water (normally iron-free) or in natural waters as well as in garden ponds. Levels between 0.002 and 0.05 mg/l are recommended in marine aquariums.

 

Ringkasan kegunaan produk :

  • alat tester pengukur Iron / Fe
  • memberikan hasil tes kandungan Copper dengan akurat pada akuarium air tawar atau air laut
  • range of values:< 0,02; 0,05; 0,1; 0,2; 0,4; 0,6; 0,8; 1,0; 1,5 mg/l
  • merespon terhadap segala jenis bentuk Iron Fe yang terlarut
  • untuk 50 kali pemakaian


Informasi lainnya

  • Tipe : Cair
  • Jumlah pemakaian : 50 kali


Instructions

1. Repeatedly rinse both test jars with the water to be tested.
2.Use the enclosed syringe to fill each of the test jars with 5 ml of sample water.
3. Add 5 drops of Fe reagent to one of the test jars and mix by shaking. Allow to settle for 5 minutes.
4. Place both test jars into the comparator block: the jar with added reagent into the smooth end of the comparator block, the jar with the untreated test water (blank sample) into the notched end of the comparator block.
5. Move the comparator block together with the jars backwards and forwards on the colour chart, with the notched side of the block facing the scale, until the colour of the sample treated with reagent matches the colour under the blank sample as closely as possible.
6. Read the iron content in the notch of the comparator.